Our premix range is inclusive of Plaster, Mortar, Screed and Shotcrete, which offer a consistent superior final product of known performance produced under controlled conditions to meet SABS specification.
PPC Premix products are quality premixes made by drying sand through a kiln to make it very fine, get rid of all impurities and reduce moisture content significantly. It is an accurate mix of dry fine sand with premium PPC, and provides convenience as you just add water.
Our Premixes include:
SURESCREED is a 20MPa 1:4 Sand & Cement Mix, blended with good quality dry aggregates, applied to floors for a smooth finish before tiling or carpeting.
It is preferable to have a clean concrete surface where mixing can take place. It is preferable that only full bags be used at any time, e.g. do not split bags into halves. Ensure there is no excess water on the mixing surface
Our SURESCREED can be designed to desired strength if required.
SURECRETE is a 30MPa 1:4 Sand & Cement Mix, blended with good quality, dry aggregates, commonly used to line tunnel walls, in mines, subways, and automobile tunnels
Mixing should be done in the application machine with water added at the nozzle of the shotcrete machine. The area that can be covered is highly dependent on the applicator and can therefore not be guaranteed
Our SURECRETE can be designed to desired strength if required.
Our Premix products are available in both Bag (40kg) and in Bulk for the SUREPLASTER and SUREMORTAR(16 ton, 21 ton and 34 ton silos). Delivery vehicles supply 17 tons of material per delivery which typically takes 30 minutes to offload.
When making use of the Bulk options, customers are required to construct a 3m x 3m x 125mm slab where the silo will be placed. The silo placement area must be level and in an uncongested area.